← Curriculum
Module 07 · 22 min

The Economics: Why Good Recycling Still Fails

The money module — oil, EPR, and the break-even price

Before we start

Here is something that frustrates every new recycling engineer: you can sort a stream perfectly, run a clean plant, produce a beautiful bale of recycled plastic, and still find that nobody wants to buy it. Why? Often because the price of oil dropped. Recycled plastic competes against virgin plastic, virgin plastic is made from oil, and when oil is cheap, your perfectly recycled material is simply too expensive. Your effort had nothing to do with it.

Recycling is an environmental activity, but it lives or dies on economics. This module is the money module. If you want to design or defend a recycling programme, you need to understand who pays, who profits, and why the numbers so often don't add up without policy support.

By the end you should be able to: (1) list the main cost and revenue components of recycling; (2) explain why recycling is often more expensive than landfill in the short term; (3) explain why recycled plastic's price is tied to the oil price; (4) explain how Extended Producer Responsibility changes the economics, using Germany; (5) build a simple per-tonne profit-and-loss and find a break-even point.

Part A — Where the money goes, and where it comes from

Costs: collection and transport (often the single largest cost, since gathering material from scattered households is labour- and fuel-intensive), sorting and processing (capital plus operating cost, worse when contamination is high), reprocessing into usable raw form, residue disposal for whatever can't be recycled, and education and enforcement (easy to cut, expensive to skip).

Revenues: sale of recyclables (commodities priced on quality and global supply and demand), avoided disposal (every tonne recycled is a tonne you don't pay to landfill, which matters most where landfill is expensive, as in much of Europe), and broader externalities and jobs that rarely appear on the local balance sheet.

The uncomfortable core fact

In many places, the all-in cost of recycling is higher than landfilling, at least in the short term and at current prices. That gap is why recycling needs either a mandate or a financial mechanism to survive. Markets alone underinvest, because the benefits (cleaner environment, conserved resources) don't show up on the same ledger as the costs.

The part they don't teach in class: recycled plastic's price is set in the oil market

This is the insight that reframes everything. More than 98% of virgin plastic is made from fossil fuels, so its cost rises and falls with oil. Recycled plastic competes directly against it. The result is a strong positive correlation: when crude oil is high, virgin plastic is expensive and recycled plastic looks like a bargain; when crude oil is low, virgin plastic is cheap and recycled plastic struggles to sell at all (sustainability-directory analyses, 2025; Recycling Today, 2026).

This is not theory. During the low, stable oil years of roughly 2015–2020, virgin resin was often so cheap that recycled plastic could not compete, which suppressed demand for recyclate, starved the sector of investment, and put recyclers out of business. More recently, higher and more volatile oil prices have eroded virgin plastic's advantage, and in Europe high-grade recycled PET has even traded around €1,000–€1,400 per tonne, helped by something we will see in Part B: laws that force demand (Reports and Data, 2025).

So a recycler's fortunes are decided by two things mostly outside their control: the oil price and government policy. Sorting well is necessary but not sufficient. An engineer who understands this will design for resilience and will argue for the policy that stabilises demand, rather than assuming a clean bale guarantees a buyer.

Markets are volatile, and that breaks programmes

The oil link is one source of volatility; trade policy is another. China's 2018 import restrictions turned mixed paper and low-grade plastic from a revenue source into a disposal cost almost overnight, and some programmes were suspended (see Module 2). A system that only works at high commodity prices is not a system; it is a bet.

Part B — Spotlight: the German EPR system (VerpackG)

Dossier № 07
Dossier · Germany

VerpackG — manufacturing a stable market for recyclate

If markets are this volatile and often stacked against recyclate, something has to create stable demand. In Europe, the main mechanism is Extended Producer Responsibility (EPR), and Germany runs one of the most developed versions.

What it is

Germany's Packaging Act (Verpackungsgesetz, VerpackG) came into force on 1 January 2019, building on the EPR principle that goes back to the Green Dot in 1990. Whoever puts packaging on the German market pays for its collection and recycling, instead of leaving the bill to municipalities and taxpayers (ZSVR; trade guides).

How it works

Any company placing packaging on the German market — including importers and online sellers — must register in the public LUCID register run by the Central Agency Packaging Register (ZSVR), license its packaging with a dual system such as Der Grüne Punkt or Interzero, pay a fee (typically a few cents per kilogram, by type and quantity), and report volumes. Non-compliance carries fines up to €200,000 and a sales ban.

Why this matters economically

EPR moves the cost of recycling off the municipal budget and onto producers, hence onto product prices. More powerfully, fees can be eco-modulated: hard-to-recycle packaging costs the producer more, which turns recyclability into a design incentive. And the recycled-content mandates coming through the EU PPWR (Module 8) create something the volatile market can't: guaranteed demand. That mandated demand is a big part of why high-grade recycled PET held its price even when raw economics would have undercut it. EPR plus recycled-content rules is, in effect, how Europe manufactures the stable market that recycling needs.

Who hires for this kind of work

EPR has created a whole profession: compliance specialists, analysts at the dual systems and producer-responsibility organisations, packaging-data managers, and "design for recycling" advisers who help brands lower both their environmental impact and their fees. Understand both the engineering and the rules and you are unusually employable here.

Part C — Do the work

Task 1 — A per-tonne profit and loss

Build a model for one tonne of collected material. Use these illustrative figures (for learning, not real prices): collection & transport €120/t; sorting & reprocessing €60/t; residue disposal €40/t of residue; material sale revenue €90/t of saleable output; avoided landfill €70/t. Assume 80% becomes saleable output and 20% is residue. Work out the net cost or profit per tonne, then find the break-even material price (how high the sale price would need to be to break even, all else equal).

Task 2 — The oil-price scenario

The oil price falls sharply and virgin plastic becomes 30% cheaper. In three or four sentences, explain what happens to your recycler's economics, why, and one policy measure that would protect the operation through the dip. This is the centerpiece idea applied.

Task 3 — Set the EPR fee

You run a dual system and must set fees that reward good packaging. Rank these from lowest fee to highest, and justify by recyclability: a clear mono-material PET bottle; a black plastic tray; a multi-layer foil pouch; an aluminium can.

Deliverable. Your per-tonne net result and break-even price, your oil-price scenario answer, and your fee ranking with reasons. Upload as text and/or a file.

Watch

One is enough here. Most recycling-economics explainers are commercial or news content rather than openly licensed, so I won't add one just to reach two.

Watch
Alice Aedy / Earthrise Studio · TED-Ed
· ~6 min
Can the circular economy solve our plastics problem?

A short, clear look at why the recycling system is economically broken and what a reuse-based, circular model would change. Frames the systemic and economic argument behind this module.

Open on TED-Ed ↗

From the field

Sources

  1. Oil ↔ recycled-plastic price link — virgin plastic is >98% fossil-derived and tracks oil; strong positive correlation between crude prices and recyclate competitiveness; cheap oil (2015–2020) undercut recyclate and put recyclers out of business; recent higher/volatile oil eroding virgin's advantage; European high-grade rPET ~€1,000–1,400/tonne. sustainability-directory.com (2025); Recycling Today / Callaway Climate Insights (2026); Reports and Data, Recycled Plastics Market (2025). Prices move — use current dated figures for any published number.
  2. German Packaging Act (VerpackG, 1 Jan 2019); ZSVR and the public LUCID register; producers register, license with a dual system (Der Grüne Punkt, Interzero), pay fees by material type/quantity, report volumes; fines up to €200,000; eco-modulation of fees. https://www.verpackungsregister.org/ ; ecommercegermany.com.
  3. China 2018 import shock and price collapse — see Module 2 sources.
  4. Alice Aedy / Earthrise Studio, "Can the circular economy solve our plastics problem?", TED-Ed. https://ed.ted.com/ (Creative Commons).

All URLs accessed June 2026.

Do the work · 3 tasks

Submit your work for feedback

Each task is graded immediately by an AI tutor using the rubric below. An instructor can override the AI score and leave a final comment.

Task · max 10 pts

Per-tonne P&L and break-even price

Use the per-tonne assumptions in the rubric/prompt below. Fill the P&L table and the break-even sale price. Show your working in the last field. Costs: collection & transport €120/t; sorting & reprocessing €60/t; residue disposal €40 per tonne of residue. Revenues: material sale €90 per tonne of saleable output; avoided landfill €70/t collected. Assume 80% saleable output, 20% residue.

Grading rubric

Credit for: (1) correct costs: 120 + 60 + (0.20 × 40) = €188/t; (2) correct revenues: (0.80 × 90) + 70 = 72 + 70 = €142/t; (3) net = −€46/t (loss); (4) break-even sale price: (188 − 70) / 0.80 = €147.50/t of saleable output; (5) clear show-your-working. Score out of 10.

Item€ value
Total costs (€/t)
Total revenues (€/t)
Net result (€/t)
Break-even sale price (€/t of saleable output)
Sign in to attach a file.
Task · max 10 pts

The oil-price scenario

Oil drops; virgin plastic gets 30% cheaper. Explain the impact on a plastic recycler in 3–4 sentences and name one policy lever to protect them through the dip.

Grading rubric

Credit for: (1) recyclate sale price falls (or buyers vanish) because virgin undercuts it; (2) explicit link to the >98% fossil-origin / oil-price mechanism; (3) one concrete policy lever (mandated recycled content, landfill tax, EPR fee uplift, carbon price) — not vague "more support". Score out of 10.

Sign in to attach a file.
Task · max 10 pts

Set the EPR fee

You run a dual system. Set EPR fees that reward good packaging by ranking each item 1 (lowest fee) to 4 (highest), with a one-line reason tied to recyclability.

Grading rubric

Credit for: (1) defensible ranking — typically aluminium can ≈ clear PET bottle (lowest), then black tray, then multi-layer pouch (highest); (2) reasons tied to mechanisms covered in earlier modules (NIR-invisible carbon black, inseparable multi-layers, strong end-markets for Al and clear PET); (3) acknowledgement that the relative order of Al vs PET can flip by jurisdiction. Score out of 10.

ItemFee rank (1 = lowest, 4 = highest)Reason tied to recyclability
Clear mono-material PET bottle
Black plastic tray
Multi-layer foil pouch
Aluminium can
Sign in to attach a file.
Module quiz · 6 questions · pass at 80%

Check your reading

  1. 1.

    Which cost is typically the single largest line item in a household recycling programme?

  2. 2.

    Why does the price of recycled plastic move with the price of crude oil?

  3. 3.

    Which period saw oil-driven low virgin-plastic prices push many recyclers out of business?

  4. 4.

    Under Germany's VerpackG, who must register in the public LUCID database before placing packaging on the market?

  5. 5.

    What is "eco-modulation" of EPR fees designed to do?

  6. 6.

    Why does EU recycled-content mandates (e.g. PPWR) plus EPR matter so much for recyclers' economics?

0/6 answered
Module checklist

Apply what you've learned