← Curriculum
Module 03 · 20 min

Materials and Their Recyclability

the engineering reality

Before we start

Here is a fact that quietly demolishes most of what people assume about recycling: about 90% of metal gets recycled, but less than 10% of plastic does. Same bins, same good intentions, wildly different outcomes. The reason has nothing to do with how hard people try and everything to do with the materials themselves.

This module gives you the engineer's view of the main waste streams: how each behaves, why some loop almost forever while others take a one-way detour to the landfill, and which streams are so valuable or so dangerous that they need their own dedicated technology. Treat all materials the same and you will make bad decisions. See them clearly and you can predict, before any plant is built, what will actually happen.

By the end of this module you should be able to:

  1. Explain why metals and glass loop well while most plastics don't.
  2. Define downcycling and identify which materials suffer from it.
  3. Explain why e-waste is both the most valuable and one of the most dangerous waste streams.
  4. Read a product's bill of materials and predict where it will fail in recycling.

Part A — The concept

Materials are not equal, and this chart explains the whole field

Figure · Recyclability by material
Metals (Al/steel)
~90%
Almost none per cycle
Paper
~68%
Fibres shorten — ~5–7 loops
Glass
~55%
None chemically; breakage in mixed collection
Plastics
~9%
Degrades fast; many incompatible types
Recycling rates and quality loss per cycle. Sources: OECD 2022 (plastics), industry / CEPI / glass federations.

Metals are the best case. Aluminium and steel melt and reform repeatedly with little quality loss, so scrap holds real, lasting value. Recycling aluminium is commonly cited as using about 95% less energy than making it from ore, a saving large enough that the economics usually take care of themselves (long-cited industry figure; verify against European Aluminium or the International Aluminium Institute). Steel is magnetic, so it is trivial to pull out at a plant.

Glass can in principle be remelted endlessly without quality loss. Its problems are practical, not chemical: it is heavy, so transport costs and emissions bite, and it breaks, so in mixed collection it shatters and contaminates other streams.

Paper recycles well but not forever. The fibres shorten each cycle, so paper survives perhaps five to seven loops before the fibre is too short to use, then drops to low grades and out of the loop (standard sector figure; confirm with a source such as CEPI).

Plastics are the hard case, and the reason metals beat them so badly comes down to sorting. Plastics arrive in dozens of incompatible types, often mixed inside a single product, and they degrade each time they are melted. As plastics engineer Mike Biddle put it in his TED talk, the recycling problem is really a sorting problem: there are simply too many kinds to separate cheaply (Biddle, TED, 2011). That is why less than 10% of plastic is recycled while 90% of metal is.

Downcycling: the word the industry doesn't advertise

Even when plastic is "recycled," it is usually downcycled: a clear bottle becomes fibre, fibre becomes stuffing, and eventually the material leaves the loop for landfill or incineration. So counting that bottle as "recycled" overstates the benefit, because it was a delay of disposal, not a closed loop. Metals and glass largely escape this. Most plastics do not. When someone says a product is "recycled," your reflex question should be: "into the same thing, or into something worse?"

The part they don't teach in class: your e-waste is the richest ore on Earth

Figure · The urban mine — value left on the table
Raw-material value in 2022 e-waste
US$91 bn
Value actually recovered
US$19 bn
E-waste generated
62 Mt
Formally collected & recycled
22.3%
Source: ITU / UNITAR — Global E-waste Monitor 2024.

Electronics are where the materials story gets dramatic. A tonne of discarded circuit boards contains far more gold than a tonne of natural gold ore, which is why recovering metals from electronics is called "urban mining." E-waste is, by value per tonne, one of the richest waste streams that exists.

And yet, according to the 2024 Global E-waste Monitor, the world generated 62 million tonnes of e-waste in 2022 and only 22.3% was formally collected and recycled. The raw materials in that e-waste were worth roughly US$91 billion, of which only about US$19 billion was recovered (ITU/UNITAR, 2024). The rest is largely lost, and a great deal of it is processed informally, sometimes by burning cable insulation by hand to get at the copper, which releases toxic fumes and poisons the people doing it. So e-waste is the field's sharpest paradox: the most valuable waste we make, handled in some of the most dangerous ways. Recovering it safely is both an environmental and an economic opportunity, which is exactly why specialised technology (Module 6) exists for it.

Part B — Company & Tech Spotlight

Dossier № 03
Dossier · Netherlands

DESPRAY Environmental — aerosol recycling

An aerosol can is a deceptively nasty object. It is metal you would want to recover, but it is also a pressurised vessel that almost always still holds flammable propellant and product when thrown away. Crush or puncture it carelessly and you have a fire. This is a material that needs its own technology.

What it is

DESPRAY Environmental is a Dutch company based in Almelo, part of the Boessenkool group's long machine-building heritage. It builds self-contained aerosol-can recycling systems and describes its technology as recovering close to 100% of the liquid, gas, and metal from spray cans (DESPRAY company website).

How it works, in engineering terms

Instead of puncturing cans to open air, the system feeds them into an enclosed, inert, anti-explosive chamber whose atmosphere is monitored for oxygen so it never becomes explosive. A de-packing "densifier" separates the can from its contents; the liquid and propellant are captured into separate containment tanks; and the propellant gas is recompressed back into a liquid for reuse as an alternative fuel. The metal comes out clean for recycling. Systems are built to ATEX, CE, or UL standards.

Why it belongs here

It makes the module's lesson concrete: when a material is hazardous or complex, the answer is not a better bin but a purpose-built machine, and there is a real engineering business in solving exactly these niche streams. We return to DESPRAY in Module 6.

Who hires for this kind of work

Specialist equipment builders like this hire mechanical and process engineers, safety/ATEX specialists, commissioning engineers who travel to install on site, and application engineers who match a system to a customer's waste. It is technical, hands-on, and international.

Part C — Do the work

Task 1 — Rank by real-world recyclability

Rank these from "loops best" to "loops worst" in practice, not in theory: aluminium can, glass bottle, office paper, clear PET bottle, multi-layer snack pouch. One line each on the engineering reason (quality loss per cycle, sortability, market).

Task 2 — A product teardown

Pick one real product with mixed materials (toothpaste tube, coffee capsule, blister pack, trainers). List its rough bill of materials. For each component, mark whether it would be recovered or lost in a normal sorting line, and name the single design change that would most improve its recyclability.

Task 3 — Mine your own drawer (the urban-mining task)

Pick one old electronic device you own. List two valuable materials and two hazardous materials likely inside it. Then find out, from a real local source, where you could actually recycle it and what is supposed to happen to it. One short paragraph. This connects the "richest ore on Earth" idea to your own life.

Deliverable. Your ranked list with reasons, your product teardown with one design fix, and your urban-mining paragraph. Both pieces are submitted as tasks below — you'll get AI feedback on each.

Watch

Both are from TED, released under a Creative Commons licence and free to watch and embed. One for the materials principle, one for the fate of a single bottle.

Watch
Mike Biddle · TEDGlobal 2011
· ~12 min
We can recycle plastic

A plastics engineer explains why so little plastic is recycled compared with metals, and shows that the core challenge is sorting the many incompatible types. The clearest statement of this module's central idea.

Open on TED ↗
Watch
Emma Bryce · TED-Ed
· 4:07
What really happens to the plastic you throw away

A short animation following three plastic bottles to three very different fates: recycling, landfill, and the ocean. Accessible and memorable.

Open on YouTube ↗

From the field

Sources

  1. Mike Biddle, "We can recycle plastic," TED (2011): less than ~10% of plastic recycled vs ~90% of metals, due to the difficulty of sorting many plastic types. https://www.ted.com/talks/mike_biddle_we_can_recycle_plastic (CC BY-NC-ND).
  2. OECD (2022), Global Plastics Outlook: ~9% of plastic waste ultimately recycled. https://www.oecd.org/environment/plastics/
  3. ITU / UNITAR (2024), Global E-waste Monitor 2024: 62 Mt e-waste in 2022, 22.3% formally collected and recycled; raw-material value ~US$91 bn, ~US$19 bn recovered. https://ewastemonitor.info/
  4. DESPRAY Environmental — aerosol recycling; enclosed anti-explosive chamber; metal/liquid/propellant separation; propellant recompressed for reuse; ATEX/CE/UL; DS1500 ~1,500–2,000 cans/hr. https://www.despray.com/ (treat "100% recovery" as the company's stated claim).
  5. Aluminium ~95% energy saving vs virgin: long-cited industry figure; verify against European Aluminium / International Aluminium Institute. Paper ~5–7 cycles: standard figure; confirm via CEPI.
  6. Emma Bryce, "What really happens to the plastic you throw away," TED-Ed. https://www.youtube.com/watch?v=_6xlNyWPpB8 (CC).

All URLs accessed June 2026. Where figures are paraphrased, the linked primary documents are the authoritative reference — quote directly only with attribution.

Do the work · 2 tasks

Submit your work for feedback

Each task is graded immediately by an AI tutor using the rubric below. An instructor can override the AI score and leave a final comment.

Task · max 10 pts

Rank five items by real-world recyclability

Rank each item from 1 (loops best in practice) to 5 (loops worst). Add one line per item on the engineering reason — quality loss per cycle, sortability, or end-market.

Grading rubric

Award credit for: (1) a defensible ranking (aluminium and glass near the top, multi-layer pouch at the bottom; PET typically above paper for closed-loop bottle-to-bottle but reasonable variation is OK if justified); (2) reasons that name real mechanisms (quality loss per remelt, magnetic/optical sortability, fibre shortening, multi-layer separability, end-market demand); (3) no vague answers like 'easy to recycle.' Score out of 10.

ItemRank (1–5)Engineering reason (1 line)
Aluminium can
Glass bottle
Office paper
Clear PET bottle
Multi-layer snack pouch
Sign in to attach a file.
Task · max 5 pts

Product teardown + one design fix

Pick one real mixed-material product. Fill the bill of materials, mark each component as recovered or lost on a normal sorting line, then name the single highest-leverage design fix.

Grading rubric

Award credit for: (1) a realistic bill of materials (not just 'plastic'); (2) a recovered/lost call per component that names the failure mode (multi-layer, black plastic, glued composite, small <50mm); (3) one design fix that is concrete and high-leverage (mono-material, removable component, larger PCR-friendly format). Score out of 5.

ItemMaterialRecovered or lost?Failure mode (if lost)
Component 1
Component 2
Component 3
Component 4 (optional)
Component 5 (optional)
Sign in to attach a file.
Module quiz · 6 questions · pass at 80%

Check your reading

  1. 1.

    Roughly what share of plastic is recycled globally, compared with metals?

  2. 2.

    Recycling aluminium versus making it from ore typically uses about:

  3. 3.

    Downcycling means:

  4. 4.

    According to the 2024 Global E-waste Monitor (2022 data), what share of e-waste was formally collected and recycled?

  5. 5.

    The raw-material value embedded in 2022's e-waste was ~US$91 bn. Roughly how much was actually recovered?

  6. 6.

    DESPRAY's aerosol recycling system avoids fires by:

0/6 answered
Module checklist

Apply what you've learned