← Curriculum
Module 05 · 22 min

Collection and Sorting Systems

From bin to commodity

Before we start

A dead disposable vape, tossed into the wrong bin, can burn down a recycling plant. That is not an exaggeration. Across the US and Canada, publicly reported fires at waste and recycling facilities hit a record in 2025, and the industry traces a large share of them to lithium-ion batteries hidden in the waste stream, with single-use vapes a fast-rising cause.

Everything between the household and the recycler happens in this module. How you collect material decides how clean and how safe it is; how you sort it decides how much value you can recover. Get collection wrong and no plant can save you — and as the battery story shows, the wrong item in the wrong bin is not just a quality problem, it is a fire risk.

By the end of this module you should be able to: (1) compare the main collection models and say which suits which context; (2) explain why deposit-return produces the cleanest material, using Germany's Pfand; (3) walk through the stages of a sorting plant and say what each removes; (4) explain why batteries have become the sector's most dangerous contaminant.

Part A — Collection models: the convenience-versus-purity paradox

Here is a truth that surprises people: the easier you make recycling, the dirtier it tends to get. There is a constant trade-off between convenience and purity.

  • Single-stream: everything in one bin. Easiest for residents, highest participation, but the dirtiest input and the most expensive to sort cleanly.
  • Dual-stream: paper separate from containers. Cleaner paper, modestly more effort.
  • Multi-stream (source-separated): separate streams for paper, glass, packaging, organics, residual. Highest purity, more effort. The German model — yellow for packaging, blue for paper, glass containers, brown for organics, grey for residual.
  • Deposit-return (DRS): a parallel channel for beverage containers — see below.
  • Drop-off / bring banks: residents transport material themselves. Cheap for the authority, lower participation.

There is no universally right model. It depends on density, culture, budget, and what the end markets demand.

The cleanest recycling on Earth is made by a coin, not a machine

Germany's Pfand system is the clearest proof that behaviour beats technology for quality. Consumers pay a deposit (about €0.25 on single-use bottles and cans) and get it back when they return the empty, usually through a reverse vending machine. The system has been mandatory for single-use containers since 2003, was expanded in 2022, and added milk drinks in 2024. Germany's statistics office reported about 97.7% return for single-use plastic bottles in 2024, and the figure is widely quoted as around 98%.

The cleanest plastic stream in the world is not created by a better sensor. It is created by a 25-cent incentive that makes people hand back a separate, undamaged, single-material container. One honest caveat: no single agency publishes a fully reconciled official rate, so treat "98%" as well-supported rather than audited. Either way, the lesson stands — collection design, including simple economic nudges, often matters more than plant technology.

Inside the sorting plant: the cascade

When mixed recyclables reach a materials recovery facility, they pass through a cascade, and the order matters because each stage prepares the stream for the next.

  1. Intake and pre-sort — workers pull obvious hazards and big contaminants (bags, hoses, the stray battery).
  2. Screens — separate by size and shape, dropping out small broken glass, lifting flat cardboard away from rounded containers.
  3. Magnet — pulls out ferrous metals (steel and tin-plated cans).
  4. Eddy current — repels non-magnetic aluminium off the belt into its own stream.
  5. Optical / near-infrared sorting — identifies plastics by polymer and air-jets them apart (the TOMRA technology from Module 4).
  6. Robotics and AI — robot arms pick items the earlier stages missed and quality-check outputs.
  7. QC and baling — a final check, then compression into commodity bales.

If you can recite this cascade and explain why magnets come before eddy current, you understand a MRF better than most people who work near one.

The part they don't teach in class: batteries are now the sector's most dangerous contaminant

Module 4 treated contamination as a quality problem. Here is its most dangerous form. Lithium-ion batteries, when crushed in a collection truck or a sorting machine, can short internally and go into thermal runaway, causing fires and even explosions. They arrive hidden inside vapes, phones, toys, and toothbrushes — and they are increasingly common.

A US industry association estimated more than 5,000 fires a year at recycling facilities, many linked to batteries. One fire-safety specialist named the main driver "the vape effect," pointing to roughly 1.2 billion single-use vapes entering waste streams a year. Europe is not spared: a battery recycling plant fire in Madrid in July 2025 released toxic gas and forced a large local evacuation. Insurers are now raising premiums or refusing to cover MRFs over battery fire risk — so a contaminant the size of your thumb is reshaping the economics and the engineering of entire plants.

Part B — Company & Tech Spotlight

Dossier № 05
Dossier · Germany

STADLER — designing a plant against fire

If TOMRA makes the sensors, someone designs and builds the whole plant around them — increasingly with fire in mind. That is STADLER's job.

What it is

STADLER Anlagenbau is a German family business in Altshausen, founded in 1791, which grew from a blacksmith forge into one of the world's leading builders of turnkey sorting plants. It has built more than 600 complete plants and sold over a thousand of its ballistic separators, with around 650 staff. It often pairs with sensor specialists: on a textile-sorting plant in Sweden, STADLER built the plant and TOMRA supplied the near-infrared sorters — exactly how the cascade in Part A is assembled in real life.

The detail that ties this module together

STADLER rebuilt the Sortierkontor Nord lightweight-packaging plant in Bremen after two battery-related fires in 2022. The rebuilt plant processes around 120,000 tonnes a year from the dual collection systems and was redesigned with separated halls, monitored fire zones, and automated battery extraction (STADLER, 2026). The battery problem from Part A is not abstract for a plant builder; it is now a design requirement.

Who hires for this kind of work

Turnkey plant builders need process engineers to design the flow, mechanical and electrical engineers for the machinery, controls and automation engineers, commissioning engineers who travel to start plants up, and service engineers for the installed base. Increasingly they also need safety and fire-engineering expertise. This is project engineering with a clear circular-economy purpose, and it is international by nature.

Part C — Do the work

Task 1 — Choose a collection model

Advise two very different places: (a) a dense European city with high awareness, limited household space, strong compliance; (b) a fast-growing city with low formal collection coverage, tight budgets, an active informal sector. Recommend a collection model for each, with two reasons per choice. A weak answer ignores the context.

Task 2 — Order the cascade

Put these six stages in correct order and write one line each on what they do: optical/NIR sorter, eddy current, intake pre-sort, magnet, size screens, baling. Then answer: why must the magnet come before the eddy current separator?

Task 3 — The battery audit

Walk through your home and list every item containing a lithium-ion battery that someone might wrongly toss into a recycling or waste bin (vapes, old phones, earbuds, toys, power banks). Pick one and propose how a city could keep it out of the bin (a drop-off design, a deposit, a retailer take-back), and name one way to measure whether your idea works.

Deliverable. Your two collection recommendations with reasons, the correctly ordered cascade with the magnet/eddy-current explanation, and your battery audit with one intervention and a measurement.

Watch

One is enough here. Most plant-tour and deposit-system videos are company-owned and not openly licensed, so I'm not adding one just to reach two.

Watch
Mani Vajipey · TED
· ~10 min
How India's local recyclers could solve plastic pollution

A look at how collection actually works in a system built on informal recyclers, and how organising them could change a country's plastic outcomes. A useful contrast to the formal German model in this module.

Open on TED ↗

From the field

Sources

  1. German Pfand / deposit-return — operator DPG; €0.25 single-use deposit; mandatory since 2003, expanded 2022, milk drinks from 2024; return ~98%, Destatis ~97.7% for single-use plastic bottles in 2024. https://www.dpg-pfandsystem.de/
  2. Battery fires — National Waste & Recycling Association estimate of >5,000 fires/year at recycling facilities; US+Canada publicly reported facility fires 373 (2023) → 430 (2024) → 448 (2025), ~100 catastrophic events, ~$2.5bn damage in 2025; "vape effect," ~1.2bn single-use vapes/year; Madrid battery plant fire July 2025. Resource Recycling (2024–2026); International Fire & Safety Journal (2025); MDPI Fire review (2026).
  3. STADLER Anlagenbau — Altshausen, founded 1791, 600+ plants, ~650 staff; Bremen SKN plant ~120,000 t/year rebuilt after 2022 battery fires; STADLER+TOMRA Sweden textile plant. https://www.w-stadler.de/
  4. Mani Vajipey, "How India's local recyclers could solve plastic pollution," TED. https://www.ted.com/ (Creative Commons).

All URLs accessed June 2026.

Do the work · 3 tasks

Submit your work for feedback

Each task is graded immediately by an AI tutor using the rubric below. An instructor can override the AI score and leave a final comment.

Task · max 10 pts

Choose a collection model for two cities

Recommend a collection model for each city and give two reasons tied to its context.

Grading rubric

Credit for: (1) a specific model named for each city (not just "recycle more"); (2) two concrete reasons per choice that reference the context (density, budget, informal sector, compliance culture); (3) acknowledgement that there is no universal right answer. Score out of 10.

ItemRecommended collection modelReason 1Reason 2
City A — dense European, high awareness, limited space, strong compliance
City B — fast-growing, low formal coverage, tight budget, active informal sector
Sign in to attach a file.
Task · max 10 pts

Order the cascade + magnet/eddy-current

Number these six stages in correct order (1–6) and write one line on what each does. Then explain in 2–3 sentences why the magnet must come before the eddy-current separator.

Grading rubric

Credit for: (1) correct order — intake pre-sort → size screens → magnet → eddy current → optical/NIR → baling; (2) accurate one-line description of each stage; (3) clear explanation that the eddy current targets non-ferrous metals and steel must be removed first or it contaminates the aluminium stream. Score out of 10.

ItemOrder (1–6)What it does (1 line)
Optical / NIR sorter
Eddy current
Intake pre-sort
Magnet
Size screens
Baling
Sign in to attach a file.
Task · max 10 pts

The battery audit

Walk through your home and list lithium-ion items that could be wrongly binned. Pick one and propose how a city could keep it out of the bin, with a measurable indicator.

Grading rubric

Credit for: (1) a real list of at least 5 items; (2) one concrete intervention tied to a specific item (not generic "educate people"); (3) a measurable indicator (return rate, fires per month, drop-off tonnage, audit % of residual). Score out of 10.

Sign in to attach a file.
Module quiz · 6 questions · pass at 80%

Check your reading

  1. 1.

    Which collection model typically yields the cleanest material but requires the most effort from residents?

  2. 2.

    Roughly what return rate does Germany's Pfand achieve for single-use plastic bottles (Destatis, 2024)?

  3. 3.

    In the MRF cascade, why must the magnet come BEFORE the eddy-current separator?

  4. 4.

    Publicly reported facility fires across the US and Canada hit what record in 2025?

  5. 5.

    Why are lithium-ion batteries the sector's most dangerous contaminant?

  6. 6.

    Founded in 1791 in Altshausen, which German family business builds turnkey sorting plants — and rebuilt Bremen's SKN plant with battery-fire safeguards after 2022?

0/6 answered
Module checklist

Apply what you've learned