Aerosol cans have a problem. The EU is forcing a redesign.
The classic aerosol can is a mixed-material package pretending to be a metal one. Under the PPWR, that pretence is about to become illegal.
Aerosol cans are quietly one of the most clever pieces of mass-market packaging ever built. Hairspray, cooking oil, spray paint, shaving foam — the same pressurised steel-or-aluminium tube has carried all of them for nearly a century.
The metal is the easy part. Aluminium and tin-plate steel are endlessly recyclable. The problem is everything else: the plastic valve, the plastic dip tube, the plastic actuator, the plastic cap. Each can is a multi-material package dressed up as a metal one.
For decades the industry tackled the wrong half of the problem. Walls got thinner ("lightweighting"). Recycled content crept up. The basic mixed-material architecture was never touched.
The Packaging and Packaging Waste Regulation (EU 2025/40) ends that.
What the PPWR actually demands
- All packaging must be recyclable by 2030. Not "in theory" — recyclable at scale, in real European MRFs.
- Every package gets a recyclability grade. A single-material glass bottle scores high. A steel can with a plastic valve, a propellant residue and a printed shrink-sleeve scores low.
- Low grades carry escalating EPR fees, and the worst grades are banned from the EU market entirely.
You cannot ask a consumer to disassemble a pressurised can before recycling. The design has to make recovery automatic, or the product loses access to 450 million customers.
What "good" looks like next
Three design responses are already in pilot.
Bag-on-Valve (BoV). The product sits in a sealed inner bag. Compressed air or nitrogen between the bag and the can pushes it out. No hydrocarbon propellant, no product-propellant mixing, almost 100% emptying, and a much cleaner end-of-life stream because the propellant is just air.
Mono-material aerosols. All-aluminium cans where the valve mechanism itself is aluminium. In some niche cases, all-plastic aerosols built around a single polymer family. One material in, one material out.
Refill systems. A durable dispenser bought once, paired with small recyclable refill cartridges. Common in cosmetics; spreading to household chemicals.
The takeaway for engineers
The aerosol can isn't disappearing. The throwaway, mixed-material aerosol can is. If your job touches packaging engineering inside the EU, the next five years are a forced redesign cycle — and the companies that have already started are the ones that will still be on shelves in 2030.